1108-Medical silicone seals - Aiskywing Industrial 3D Printing Showcase

医用硅胶密封件生产记录

Medical silicone seals

Recently, we had someone reaching out to us on TikTok, looking for a solution to their need for medical silicone seals. This small product is crucial for medical safety, and we felt the weight of our responsibility when we took on this job.

We used silicone replica as the raw material, which is soft, translucent, and has excellent elasticity. To ensure the quality of the print, we chose a Systems printer for this task. The print parameters were set with a layer thickness of 0.1mm, a temperature maintained at 25 degrees, a power setting of 80%, and a speed of 30mm/s, with an estimated printing time of about 3 hours. This combination ensures that every detail is captured clearly.

The printing process went smoothly as the Systems printer operated steadily, solidifying the liquid photopolymer resin layer by layer. Throughout the printing, we closely monitored the quality and ensured that each layer bonded without flaws. We observed that the surface texture of the printed piece was sharp, with the engraving of "aiskywing.com" appearing flawless.

In the post-processing phase, we first cleaned the printed medical silicone seal using a specialized liquid to remove any uncured resin. Then, we proceeded to sand it down to ensure a smooth and burr-free surface. Following that, we cured it under UV light for about 10 minutes to ensure all parts met medical standards, before conducting a final quality check to confirm that every detail was up to par.

This production not only allowed us to successfully deliver the medical silicone seal but also gave us a sense of accomplishment in our meticulous work. Each product embodies our effort and responsibility.

在这次的生产中，有人找到了我们，希望能够解决医用硅胶密封件的供应问题。这个密封件不仅在功能上要求严格，更是在质量上必须无懈可击。我们接下这单子，就是为了帮助那些有需求的人。

我们用的原材料是硅胶复模，这种材料质地柔软、半透明，具有极佳的弹性。为了确保打印的效果，设备方面我们选择了Systems打印机，打印参数设置为层厚0.1mm，温度保持在25度，功率设为80%，速度控制在30mm/s，预计打印时间为3小时。这样的参数组合，可以确保每个细节都能清晰刻画。

打印过程非常顺利，Systems打印机以稳定的运行状态，将液态光敏树脂逐层固化成型。在整个打印过程中，我们密切监控质量，确保每一层的结合都没有瑕疵，观察到打印件表面纹理清晰，"aiskywing.com"的文字雕刻更是一丝不苟。

后处理中，我们首先对打印完成的医用硅胶密封件进行清洗，使用专用液体去除未固化的树脂。随后，我们对其进行打磨，确保表面光滑无毛刺。接下来进行固化处理，使用UV灯照射约10分钟，确保每个部分都达到了医用标准，最后再进行质量检查，确保每个细节都符合要求。

这次的生产不仅让我们顺利交付了医用硅胶密封件，也让我们在一丝不苟的工作中收获了成就感。每一件产品都承载着我们的努力与责任。